Taking care of your car can be difficult. Especially when it comes to small issues. Knowing which product is apt for what is difficult.
So are you confused by meguiars final inspection vs quick detailer?
Quick Detailer is a spray-on product used to remove dirt and restore shine. But the Final Inspection is the last step of the detailing process. It offers a durable and glossy finish protectant. Final Inspection and Quick Detailer are made using almost the same ingredients. The prior spray lasts longer than the later one as well.
There is much more to know regarding these two products. This article has everything you need to find out which one of them you need.
General Overview: Meguiars Final Inspection Vs Quick Detailer
Both Final Inspection and Quick Detailer are useful tools for maintaining the cleanliness and shine of your vehicle. But they are not the same and here is a brief of their differences.
|Aspect||Meguiar’s Final Inspection||Meguiar’s Quick Detailer|
|Ingredients||water, hydrophobic polymers, surfactants, and scents.||water, hydrophobic polymers, surfactants, and scents.|
|When to use||After you’ve washed and dried the car, applied paint polish, and waxed it,|
(Avoid using in cold weather)
|In between car washes (is not a replacement for washing the car)|
|Why to Use||Provides a durable and glossy finish, also removes contaminants oils, fingerprints, and light grimes, dust||Removes stains on the paint and adds a layer of shine, and provides a matt finish.|
|Longevity||4-6 Months||1-4 weeks|
|Ease of Use||Can only be used after washing, drying polishing and waxing have been done||Easy process can be used any time|
|Finishing Capability||Clean neutral glossy finish||Matt finish but can leave hazy finish sometimes|
|Price (16 oz)||Check Latest Price||Check Latest Price|
The following will include further explanations of the differences.
In-depth Comparison: Meguiars Final Inspection Vs Quick Detailer
Detailed comparison of all the aspects mentioned prior is as follows:
Both the Final Inspection and the Quick Detailer from Meguiar’s are produced in water-based formulations. They do not contain silicone. In most cases, its formulation consists of a combination of lubricating agents and polymers.
Meguiar’s Final Inspection is produced by the use of a certain combination. The components of this mixture are as follows: water, hydrophobic polymers, surfactants, and aroma.
The hydrophobic polymers contribute to the formation of a barrier that is protective on the outside of your car. This may assist to prevent water and debris from penetrating.
The surfactants contribute to the removal of dirt and grime from the surface of the object. The addition of the fragrance also gives the product a pleasing odor.
Additionally, water, hydrophobic polymers, surfactants, and scents are used in the manufacturing process of Meguiar’s Quick Detailer.
Winner: This round is a draw. It is because both of the products are made of essentially the same ingredients.
When To Use:
Meguiar’s Final Inspection is used at the very last stage in the detailing process. This is in order to get a “show car” level of finish on a vehicle.
Meguiar’s Final Inspection may be applied by hand or with a machine. And it can be used on any paint finish, including clear coatings. Additionally, it is suited for use on any paint finish. More on how to put it to use in the later sections.
After washing, drying, and using paint polish on your vehicle, you can use Meguiar’s Final Inspection. But if you wish to wax the car or use sealant, it should be done before using the Final inspection as well.
So one can say that it is something to use after using cleaner wax. But avoid using this in cold weather at all times. Because it leaves streaks on the paint when used in winter.
But when to use Meguiars quick detailer?
Meguiar’s Quick Detailer is a product that is designed to be used as a touch-up product. It is most commonly used in between washes of the vehicle.
Meguiar’s Quick Detailer is not intended to serve as a replacement for regular washing and waxing of the vehicle. However, its usage in between those stages is very helpful to preserve the look of your car.
Meguiar’s Quick Detailer is an easy and practical solution to maintain the neat and bright appearance of your vehicle. And it can be done whenever you wish. More details on how to use it will be given later.
Winner: Meguiar’s Quick Detailer wins this round because it can be used anywhere and whenever you want.
Why To Use:
It is used to remove fingerprints, smudges, and other minor flaws from car paint. As was just said, Meguiar’s Final Inspection is used at the very end of the detailing process. In addition to providing an additional layer of defense for the surface of the car.
There may still be some little blemishes or scratches on the paint of your vehicle. Even after you have cleaned and dried it. These defects may be removed with the use of Meguiar’s Final Inspection. This will also give the paint a smooth and glossy sheen.
Final Inspection will help you out if fingerprints won’t come off after washing.
A protective barrier is formed on the surface of the paint by Meguiar’s Final Inspection. It is helped along by the polymers that are contained in the product. This may be helpful in protecting the paint from future degradation caused by factors. These include exposure to UV light and pollutants.
Meguiar’s Final Inspection was created to give the paint a finish that is rich and lustrous. This makes it appear as though it had been shown in a showroom not long before. It may be able to assist bring out the full potential of the paint on your car. And can make it seem as good as it possibly can.
On the other hand, Meguiar’s Quick Detailer is a product that is designed to be used as a touch-up product. It is used in between washes of the vehicle. But What does Meguiars Quick Detailer do?
Meguiar’s Quick Detailer assists in the removal of lighter dirt and impurities from the paint. It adds a layer of shine and provides a matt finish.
If you see little stains or dirt on the paint of your car, you may use Meguiar’s Quick Detailer. It is to remove them quickly and simply. You will not have to go through the process of washing and drying your vehicle.
Polymers, which are found in Meguiar’s Quick Detailer, are responsible for imparting a film of shine onto the paint. You might have not washed your car in a while. But this might assist give the appearance that the paint has been recently cleaned and polished.
The shine of the Quick Detailer does not give off the similar glossy look of the Final Inspection.
Regular use of Meguiar’s Quick Detailer may assist to preserve the overall appearance of your car. And keep it looking its best. This can be accomplished by using it in between washes.
Winner: The winner is Meguiar’s Final Inspection. Both of them have somewhat similar usability. But the FInal Inspection’s uses are better in our opinion.
The longevity of Meguiar’s Final Inspection and Meguiar’s Quick Detailer will depend on several factors. These factors include the quality of the paint on your car and the location in which the vehicle is stored. Also, even the frequency with which the products are used.
Meguiar’s Final Inspection might continue for 4 to 6 months or possibly for a longer period. Again, this depends on the state of the paint on your car. Also, the climate in which it is stored.
The layer produced by the Quick Detailer is not as robust as the barrier of the Final Inspection. And it will not remain in place for nearly as long. But it can last for at least 1 to 4 weeks.
The Quick Detailer from Meguiar’s is designed to be a short-term solution. It can assist in keeping the appearance of your car maintained in the time in between regularly scheduled washes.
So How long do quick detailers last? In most cases, the effects won’t last around for more than a few days at the most.
Winner: The winner of this is Meguiar’s Final Inspection. It lasts significantly longer than the Quick Detailer.
Ease Of Use:
You can use the Meguiars Quick Detailer at any given point to remove dirt or any stains. But the Final Inspection can be used only after you have gone through the washing drying, car polishing, and waxing steps.
But the application of Meguiar’s Final Inspection and Meguiar’s Quick Detailer is quite similar to one another. Here is how you use Meguiar’s final inspection.
Before you can use them, you need to give the bottle a good shake. After that, place a small quantity of the product onto a lint-free, gentle cloth or an applicator pad.
After that, you may wipe the product onto the surface of the paint until it is completely covered. It is recommended that one begin at the highest point and work their way down.
Be sure to work in tiny parts, and once the paint has dried. Use a cloth that is clean and dry to buff the product off the surface of the paint.
Both Meguiar’s Final Inspection and Meguiar’s Quick Detailer can be used in a manner that is not complicated. Also, depending on your desire, you can choose to apply them manually or use a machine instead.
One must use the product by the directions provided by the manufacturer. In addition, when applying the materials, do it using a clean, gentle cloth or an applicator pad. This is to prevent the paint from becoming scratched.
Winner: Meguiar’s Quick Detailer wins this round as it can be used at any time for cleaning any grime or dirt.
Meguiar’s Final Inspection is normally sold in bottles of 16 ounces. And the price of the product can range anywhere from $20 to $30. This depends on the store where you purchase it.
Meguiar’s Quick Detailer may normally be purchased in either 16-ounce or 32-ounce bottles. Its price can range anywhere from $20 to $60, depending on the shop.
The pricing of Meguiar’s Final Inspection and Meguiar’s Quick Detailer might vary. It can change based on the size of the bottle it comes in. As well as the store from where you buy it.
Winner: Meguiar’s Quick Detailer. Wins this round. Because in general, Meguiar’s Final Inspection tends to be a little bit more costly than Meguiar’s Quick Detailer.
Which one to go for
It is difficult to say which product is “better” between Meguiar’s Final Inspection and Meguiar’s Quick Detailer. This is because they are designed for different purposes and have different characteristics.
Meguiar’s Final Inspection could be an excellent choice for you. That is if you want to provide an extra layer of protection to the paint on your vehicle. Additionally, it gives a finish that is rich and shiny.
However, Meguiar’s Quick Detailer is also an option to consider. That is if you are looking for a product that can quickly and easily remove light dirt and impurities. As well as add a layer of shine to the paint.
Frequently Asked Questions (FAQs)
Is Meguiar’s Quick Detailer a wax?
The Meguiar’s Quick Detailer is a wax booster in addition to being a spray detailer. Nevertheless, it does not, in most cases, leave any surface protection behind, such as wax or sealer.
Does Meguiar’s Final Inspection remove wax?
The Meguiars Final Inspection does not remove wax from your vehicle. You may swiftly and gently detail your vehicle with the help of the spray, all without removing the wax protection.
Can a detailer remove scratches?
Polishing, waxing, and sealing are all steps in the detailing process that can disguise tiny scratches. But it is not effective for more severe scratches.
And with that we know all about Meguiars final inspection vs quick detailer. They are different products for different purposes.
Go through our article and you should be clear regarding which one of them you need.
Good luck then! See you next time!
As an Amazon Associate I earn from qualifying purchases.