If you’re like most people, you probably don’t think about your car’s wheel wells until there’s something wrong. It’s important to keep your car clean, both inside and out. Not only does it make it look nicer, but it also protects the vehicle from potential damage. One area that often gets overlooked is the wheel wells. Here are a 4 easy way on how to clean and protect them.
In this post, we’ll show you how to clean and protect wheel wells so that they stay looking great for years to come.
What is the wheel well of a car?
The wheel well is the space in the body of the vehicle where the wheel sits. Many people mistakenly believe that the wheel well is simply the hole in the body of the car that the wheel goes through.
However, the wheel well is actually the entire space around the perimeter of the wheel. This means you have 4 wheel wells on a car – two at the front and two at the back. The wheel wells are located at the front and back, usually under the front fender and rear quarter panel. While some carmakers include features such as drainage holes and access panels in their design, others do not.
As a result, many car owners are unaware of the existence of their vehicle’s wheel wells until they experience problems with them. For example, if water or debris becomes trapped in a wheel well, it can cause rusting or other damage to occur. In addition, if wheels are not properly aligned, they can rub against the inside of the wheel well, causing premature wear. Therefore, it is important to be familiar with the location and function of your vehicle’s wheel wells in order to keep them in good condition.
4 Easy Way How to Clean and Protect Wheel Wells
I’ll break down how to clean and protect your wheel wells in 4 simple steps. So let’s do it.
Step 1: Start by Knocking the Dirt Off
You can use a pressure washer if you have one or even a hose, but the key is to remove larger chunks of dirt that soap and other cleaning products will have to fight. Although it’s pretty obvious that mud, dirt, and everything else collects in your wheel wells pretty easily, it’s important that you spray it off first before cleaning. That’s why it’s so important to hose off your vehicle before washing it.
Here is a link to the pressure washer. If you want, you can buy it here at a low price.
Step 2: Apply All-Purpose-Cleaner, Body Solvent, or Degreaser
Apply an all-purpose cleaner or body solvent to the area and agitate with a brush. Once the area is clean, rinse thoroughly and dry with a microfiber cloth. Finally, apply a wheel well protectant to help repel water and dirt in the future. By following these simple steps, you can keep your wheel wells clean and protected for years to come.
Step 3: Agitate with a Wheel Well Brush
The third step in cleaning your wheel wells is to agitate the areas you sprayed with a wheel well brush. These brushes have an extra long handle, which helps you reach areas that would be difficult to access with a regular brush. The bristles on the brush are designed to loosen and remove dirt, grime, and other build-up from your wheel wells.
In addition, the brush will help to spread the cleaning solution evenly, ensuring that all areas are properly cleaned. Once you have finished agitating the area, you can move on to the next step in the process.
Step 4: Restore and Protect
After you have cleaned and dressed your tires, it is important to protect them from the elements. The best way to do this is to apply a TopCoat. A TopCoat is a clear polymer coating that guards against UV damage, prevents tire browning, and makes cleaning next time a breeze. Applying a TopCoat is simple: just spray it on and let it dry. You will know it is dry when it turns from cloudy to clear. Once it is dry, your tires will be protected from the sun’s harmful rays and the elements.
Undercarriage sprays
While there are many products on the market that claim to protect your car’s undercarriage, not all of them are created equal.
Formulated specifically for treating plastic wheel wells, it helps to enhance the color and repel dirt or dust. In addition, it is easy to apply and dries quickly, making it ideal for use on a busy schedule. If you are looking for an undercarriage spray that will give your car’s underside the protection it deserves, DK Black Out is the way to go.
Dressings and undercarriage sprays are a great way to enhance the look of your plastic wheel wells and help keep them clean. Dressings add shine and protection, while undercarriage sprays help repel dirt and dust. There are many different formulations available,
So be sure to read the labels carefully to find one that is right for your vehicle. When applying any dressing or spray, be sure to follow the directions carefully to avoid damaging the finish on your vehicle.
Wheel Well Liners
For me, it was one of those things where I thought “Why didn’t I do this sooner?” They are great for a number of reasons but the biggest one is that they protect your Wheel Wells from rocks, mud, and anything else that could potentially chip or scratch it. They are also great for protecting your Wheel Wells from road salt in the winter.
If you live in an area where it snows, you know just how destructive road salt can be. It doesn’t take long for it to eat through paint and rust metal. Wheel well liners are also very easy to install. You can usually do it yourself in less than an hour. Overall, they are a great investment for anyone who wants to protect their Wheel Wells and extend the life of their vehicle.
Undercoating Wheel Wells
For many car owners, undercoating their wheel wells is a popular way to restore or protect an older vehicle – especially if the metal is exposed (rather than plastic).
If you live in an area where snow and ice are common, or if you regularly encounter road salt, adding an extra layer of protection to your entire underbody can be beneficial. You can have a professional apply a spray-on bedliner for a few hundred dollars, or you can opt for a DIY approach.
Polyurethane coatings are also a popular option as a sealant if you don’t want a rubberized finish. No matter which route you choose, undercoating your wheel wells can help extend the life of your vehicle.
What is the purpose of wheel well liners?
The wheel well liner is a barrier between the wheel and the engine bay. Its main purpose is to protect the engine from dirt, water, and debris that can be kicked up by the tires.
In addition, wheel well liners help to reduce road noise by absorbing sound waves generated by the interaction of the tires and the road surface. In recent years, manufacturers have increasingly focused on making wheel well liners that are effective at sound deadening.
People also ask:
How do you clean and detail wheel wells?
Using a pressure washer or hose both work well for this. The most important thing is to make sure all the debris and mud is removed from the wells. You can use a brush to get into all the nooks and crannies, then using a pressure washer or hose will help remove any remaining dirt or grime. Finally, spraying down the wells with a coat of protectant will help them stay looking clean and new.
Should you clean your wheel wells?
Wheel wells are one of those often overlooked areas to keep clean. Not only do they help your car look better, but they can also help improve your gas mileage by up to 3%.
The best way to clean your wheel wells is to use a degreaser and a brush. Be sure to get the edges of the wells and all the nooks and crannies. Then rinse well with water and let dry. You can also buy a spray-on wheel well cleaner that will make this job much easier.
Do wheel wells get hot?
Yes, wheel wells do get hot. This is because they contain sources of heat such as hydraulic lines and electrical equipment. In fact, the surface temperatures of wheel wells can be as high as 160 degrees Fahrenheit! This can cause damage to the vehicle’s tires and other components.
As an Amazon Associate I earn from qualifying purchases.
Nice post!